Wlan Mode (Client) - Siemens SCALANCE W770 Series Configuration Manuals

Network structures
7.1 WLAN
Further notes
You display the setting with the show wlan basic <wlan 0/X> command.
7.1.5.56

wlan mode (client)

Description
With this command, you specify the transmission standard.
Note
This command is only available in the client mode.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan mode { show-modes | [2.4 | 5] <mode>}
The parameters have the following meaning:
Parameters Description
show-
modes
2.4
258
Lists the transmission standards.
Optional. You can use the parameter in
conjunction with "auto" and "n". This on‐
ly takes into account the transmission
standard for 2.4 GHz.
Use the parameter if the client operates
in dual-frequency mode.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Range of values / note
--
--
Configuration Manual, 09/2017, C79000-G8976-C324-08