Examples
The following example exits the shell:
WLC.siemens.com
no
Use the no option to disable a function of a command. Use the command's syntax without the no form
to enable it. The no option can also be used to delete settings or files when used with certain
commands. Not all commands within the CLI include a no option.
Syntax
no
Parameters
None
Examples
The following example configures and displays a gateway IP address, then disables it with the
command and displays the change.
WLC.siemens.com
WLC.siemens.com
gateway 192.176.3.4
WLC.siemens.com
WLC.siemens.com
no gateway
show
Use the
command to display the current configuration within a context.
show
show
Parameters
None
Examples
The following example displays the DNS configuration.
WLC.siemens.com
dns 1 192.1.1.3
SCALANCE WLC711 CLI Reference Guide
:topology:Admin:l3# logout
:topology:Admin:l3# gateway 192.176.3.4
:topology:Admin:l3# show gateway
:topology:Admin:l3# no gateway
:topology:Admin:l3# show gateway
:dns# show
Common Commands
no
no
20