No Rmon Collection History - Siemens SCALANCE XC-200 Configuration Manual

Syntax
Call up the command with the following parameters:
rmon collection history<index(1-52)>
The parameters have the following meaning:
Parameter
index
buckets
bucket-number
interval
seconds
owner
ownername
If you do not select any parameter from the parameter list, the default values are used.
Result
The data is recorded.
Further notes
You can display the content of a recording with the show rmon history command.
12.4.3.4

no rmon collection history

Description
With this command, you end the recording of statistical data of the interface.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
[buckets<bucket-number(1-65535)>]
[interval<seconds(1-3600)>]
[owner<ownername(127)>]
Description
Number of the recording
Keyword for entries
Maximum number of entries (record‐
ings)
Keyword for recording intervals
Duration of the recording intervals in
seconds
User to which the event is assigned
User name of the user
Diagnostics
12.4 RMON
Range of values / note
1 ... 65535
-
1 ... 65535
The maximum number of entries
can be restricted by the capacity
of the device.
Default: 50
-
1 ... 3600
Default: 1800
-
max. 127 characters
Default: monitor
585