Siemens SCALANCE XC-200 Configuration Manual page 510

Security and authentication
11.2 RADIUS client
Parameter
<1-254>
key
secret-key-string
primary
login
dot1x
login-dot1x
test
For information on addresses and interfaces, refer to the section "Addresses and interface
names (Page 36)".
If optional parameters are not specified when configuring, the default values apply.
Note
Primary server
In a network, only one RADIUS server can be selected as the primary server.
If you select a RADIUS server as the primary server, this replaces the server that previously
had the role of primary server.
Result
The entry for a connection between the RADIUS client and a server or the identification as
primary server is configured.
Further notes
You delete a RADIUS server entry with the no radius-server command.
You show the configuration of a RADIUS server on the client with the show radius
server command.
You show the statistical information of this function with the show radius statistics
command.
510
Description
Maximum number of connection retries 1 ... 254
Keyword for the key for communication
between the authenticator and the serv‐
er
Value for the key
Identifies the RADIUS server as primary
server
The server is used only for the login au‐
thentication.
The server is used only for the 802.1X
authentication.
The server is used for both authentica‐
tion procedures.
Tests whether or not the specified RA‐
DIUS server is available. At the same
time you can create a new RADIUS
server and run the test.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Range of values / note
Default: 3
-
46 characters
Default: empty string
-
-
-
Default setting
-
Configuration Manual, 07/2017, C79000-G8976-C361-06