Show Power-Line-State; Clear Logbook - Siemens SCALANCE XC-200 Configuration Manual

12.1.3.10

show power-line-state

Description
This command shows the status of the power supply.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show power-line-state
Result
The status of the power supply is displayed.
12.1.4

clear logbook

Description
With this command, you delete the content of the logbook.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
clear logbook
Result
The content of the logbook is deleted.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Diagnostics
12.1 Event and fault handling
549