Name - Siemens SCALANCE XC-200 Configuration Manual

no instance <instance-id (1-64)> [vlan <vlan-range>]
The parameters have the following meaning:
Parameter
instance-id
vlan
vlan-range
If you specify a VLAN or a VLAN range, the assignment to an MST instance is canceled.
If you do not specify a VLAN, the MST instance is deleted.
Result
The assignment of a VLAN to an MST instance is canceled or the MST instance is deleted.
Further notes
You assign a VLAN to an MST instance with the instance command.
You display this setting and other information with the show spanning-tree mst
configuration command.
6.3.6.3

name

Description
With this command, you configure a name for the MST region.
Requirement
You are in the MSTP Configuration mode.
The command prompt is as follows:
cli(config-mst)#
Syntax
Call up the command with the following parameters:
name <region-name>
The parameter has the following meaning:
Parameter
region-name
The default value of the name is the MAC address of the device.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Description
Number of the MST instance
Keyword for a VLAN connection
Range of VLANs that will be deleted
from the instance
Description
Name of the MST region
Network structures
6.3 Spanning Tree
Range of values / note
1 ... 64
-
1 ... 4094
Enter the range limits with a hy‐
phen or a space.
Range of values / note
max. 32 characters
261