Coordinates Longitude - Siemens SCALANCE XC-200 Configuration Manual

Configuration
3.1 System
coordinates latitude <latitude>
The parameter has the following meaning:
Parameter
latitude
Result
The latitude coordinate is created.
3.1.9.7

coordinates longitude

Description
With this command, you enter a longitude coordinate.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
coordinates longitude <longitude>
The parameter has the following meaning:
Parameter
longitude
Result
The longitude coordinate is created.
70
Description
Input box for the latitude coordinate
Description
Input box for the longitude coordinate
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Range of values / note
max. 32 characters
To use spaces in the entry, enter
the latitude coordinate in quotes:
coordinates latitude
"123 456"
Range of values / note
max. 32 characters
To use spaces in the entry, enter
the longitude coordinate in quotes:
coordinates longitude
"123 456"
Configuration Manual, 07/2017, C79000-G8976-C361-06