System; The "Show" Commands; Show Cli-Console-Timeout; Show Coordinates - Siemens SCALANCE XC-200 Configuration Manual

Configuration

3.1 System

3.1 System
This section describes commands with which general system properties can be displayed and
configured.
3.1.1

The "show" commands

This section describes commands with which you display various settings.
3.1.1.1

show cli-console-timeout

Description
This command shows the global configuration for the timeout of the CLI console.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show cli-console-timeout
Result
The configuration for the timeout is displayed.
3.1.1.2

show coordinates

Description
This command shows the system coordinates.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
48
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06