Show Logbook - Siemens SCALANCE XC-200 Configuration Manual

Diagnostics
12.1 Event and fault handling
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>orcli#
Syntax
Call the command without parameters:
show startup-information
Result
Startup information is shown.
12.1.3.6

show logbook

Description
With this command, you display the content of the logbook. The log entries are categorized
differently.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show logbook
or
Call up the command with the following parameters:
show logbook { info | warning | critical }
The parameters have the following meaning:
Parameter
info
warning
critical
546
Description
All log entries of the categories "Information", "Warning" and "Critical" are
displayed.
All log entries of the categories "Warning" and "Critical" are displayed.
All log entries of the category "Critical" are displayed.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06