Show Vlan Learning Params; Show Vlan Port Config - Siemens SCALANCE XC-200 Configuration Manual

Result
The global information is displayed.
6.1.1.9

show vlan learning params

Description
This command shows the parameters for the automatic learning of addresses for selected or
all VLANs (active and inactive VLANs).
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call up the command with the following parameters:
show vlan learning params[vlan<vlan-range>]
The parameters have the following meaning:
Parameter
vlan
vlan-range
If you do not select any parameter from the parameter list, the entries of all available interfaces
are displayed.
Result
The settings for the automatic learning of addresses are displayed.
6.1.1.10

show vlan port config

Description
This command shows the VLAN-specific information for ports.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Description
Keyword for a VLAN or VLAN range
Number of the addressed VLAN or
VLAN range
Network structures
6.1 VLAN
Range of values / note
-
1 ... 4094
Enter the range limits with a hy‐
phen or a space.
169