Show Ip Igmp Snooping Groups; Show Ip Igmp Snooping Mrouter - Siemens SCALANCE XC-200 Configuration Manual

Simatic net command line interface industrial ethernet switches

Hide thumbs Also See for SCALANCE XC-200:

Table of Contents

show ip igmp snooping groups

This command shows information about IGMP snooping for all or a selected VLAN.

You are in the User EXEC mode or in the Privileged EXEC mode or in the Global configuration

The command prompt is as follows:

cli> or cli# or cli(config)#

Call up the command with the following parameters:

show ip igmp snooping groups [Vlan <vlan id> [Group <Address>]]

[{static|dynamic}]

The parameters have the following meaning:

For information on names of addresses and interfaces, refer to the section "Addresses and

interface names (Page 36)".

The information about IGMP snooping is displayed.

This command shows the ports at which IGMP queriers are connected for all or a selected

You are in the User EXEC mode or in the Privileged EXEC mode.

SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface

Configuration Manual, 07/2017, C79000-G8976-C361-06

Keyword for a VLAN connection

Number of the addressed VLAN

Layer 2 management protocols

8.2 IGMP snooping

Range of values / note

Show Quick Links

Table of Contents