Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no rmon alarm <number (1-250)>
The parameter has the following meaning:
Parameter
number
Result
The entry for monitoring a MIB variable is deleted.
12.4.2.5
rmon event
Description
With this command, you configure an event in the RMON Event Table.
You specify a description and the person responsible and specify which SNMP notification is
generated. You can configure the sending of traps globally with the command snmp
notify.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
rmon event <number(1-500)>[description<event-description(127)>]
The parameters have the following meaning:
Parameter
number
description
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Description
Number of the alarm to be deleted
[owner<ownername(127)>][trap<notify(127)>]
Description
Number of the event
Keyword for a description
Diagnostics
12.4 RMON
Range of values / note
1 ... 250
Range of values / note
1 ... 500
-
581