Radius Client; The "Show" Commands; Show Radius Statistics; Show Radius Server - Siemens SCALANCE XC-200 Configuration Manual

Security and authentication

11.2 RADIUS client

11.2 RADIUS client
RADIUS (Remote Authentication Dial-In User Service) is a client/server protocol that allows
the centralized logging in of users logging on in a physical or virtual network. This makes central
administration of user data possible.
This section describes commands relevant for the configuration of this service.
11.2.1

The "show" commands

This section describes commands with which you display various settings.
11.2.1.1

show radius statistics

Description
This command shows the connection statistics from the RADIUS client to the RADIUS server.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show radius statistics
Result
The connection statistics are displayed.
11.2.1.2

show radius server

Description
This command shows the RADIUS server configuration.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
506
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06