Vlan Range - Siemens SCALANCE XC-200 Configuration Manual

Requirement
● The VLAN must not be assigned to a physical port.
● You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameter:
no vlan <vlan-id(1-4094)>
Parameter
vlan-id
The VLAN with number 1 cannot be deleted.
Result
The VLAN is deleted
Further notes
With the vlan command, you create a VLAN on the device.
You can display information about the VLAN with the show vlan command.
6.1.2.7

vlan range

Description
With this command, you can select several VLANs and configure them together. The
configurations are valid for all selected VLANs.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
vlan range <vlan-id(1-4094)> - <vlan-id(2-4094)>
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Description
Number of the addressed VLAN
Network structures
6.1 VLAN
Range of values / note
1 ... 4094
177