No Snmp Notify - Siemens SCALANCE XC-200 Configuration Manual

Network protocols
7.5 SNMP
Parameter
Type
Storage type
Result
The details of the SNMP notifications are configured.
Further notes
You delete the details of an SNMP notification with the no snmp notify command.
You display the configured SNMP notifications with the show snmp notif command.
You display the configured SNMP target addresses with the show snmp targetaddr
command.
7.5.2.13

no snmp notify

Description
With this command, you delete the details of the SNMP notifications.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp notify <NotifyName>
The parameter has the following meaning:
Parameter
NotifyName
340
Description
Type of the SNMP notification
Specifies whether the settings remain
following a restart.
Description
Name of the notification
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Range of values / note
● Trap
Generates a trap.
● Inform
Generates a log entry or sends
an entry to the log server.
● :
The settings are lost after a
restart
● :
The settings are retained after
a restart
Range of values / note
max. 32 characters
Configuration Manual, 07/2017, C79000-G8976-C361-06