About This Document; Revision History; Reference Documents; Before You Start - Siemens GTW100ZB Quick Start Manual

Connected home hub
Hide thumbs Also See for GTW100ZB:
Table of Contents

Advertisement

1 About this document

1.1 Revision history

Edition
Date
1
February 2022 First edition.

1.2 Reference documents

Ref.
Document title
[1]
Connected Home Hub mounting instructions
[2]
Connected Home Hub datasheet
Download the above documents from
listed above.

1.3 Before you start

Copyright
This document may be duplicated and distributed only with the express permission of Siemens.
Quality assurance
These documents were prepared with great care.
The content of all documents is checked at regular intervals.
All necessary corrections are included in subsequent versions.
Documents are automatically amended as a consequence of modifications and corrections to the products
described.
Please make sure that you are aware of the latest document revision date.
If you find any lack of clarity while using this document, or if you have any criticisms or suggestions, please
contact your local point of contact (POC) at the nearest branch office. Addresses for Siemens Regional
Companies are available at www.siemens.com/sbt.
Document use / request to the reader
Before using products from Siemens Switzerland Ltd., it is important that you read the documents supplied with
or ordered at the same time as the products (equipment, applications, tools, and so on) carefully and in full.
Before you get started, make sure you have an internet connection, a valid Email address and a smartphone in
hand.
Additional information on products and applications is available:
At your Siemens branch office
From the support team at headquarters
contact.
Siemens assumes no liability to the extent allowed under the law for any losses resulting from a failure to
comply with the aforementioned points or for the improper compliance of the same.
Symbol identifications
A6V12694177_en--_a
Changes
http://siemens.com/bt/download
www.siemens.com/sbt
fieldsupport-zug.ch.sbt@siemens.com
WARNING
This is the symbol for hazard. It warns you of Risks of injury. Comply with all
measures designated by this symbol to prevent injury or death.
by searching the document numbers
or at your system suppliers.
About this document
Section
All
Document number
A6V12694180
A6V12640776
if there is no local point of
5 | 10
1

Advertisement

Table of Contents
loading

Table of Contents