Commands In The Global Configuration Mode; Rmon - Siemens SCALANCE XC-200 Configuration Manual

Syntax
Call up the command with the following parameters:
show rmon [statistics [<stats-index (1-65535)>]] [alarms] [events]
[history [history-index (1-65535)] [overview]]
The parameters have the following meaning:
Parameter
statistics
stats-index
alarms
events
history
history-index
overview
With this command, you can display several parameters with one call.
If you do not select any parameters from the parameter list, only the enabled or disabled
status is shown.
Result
The settings of the remote monitoring function are displayed.
12.4.2

Commands in the global configuration mode

This section describes commands that you can call up in the Global configuration mode.
In Privileged EXEC mode, enter the configure terminal command to change to this mode.
Commands relating to other topics that can be called in the Global configuration mode can be
found in the relevant sections.
You exit the Global configuration mode with the end or exit command and are then in the
Privileged EXEC mode again.
12.4.2.1

rmon

Description
With this command, you enable the Remote Monitoring function.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Description
Shows counts for various packet char‐
acteristics and sizes.
Index number for the statistical values
Shows the threshold values and event
assignments for alarms.
Shows the status and the actions that
are triggered.
Shows the stored statistical values for
earlier transmission periods.
Index number for the previous statistical
values
Displays an overview.
Diagnostics
12.4 RMON
Range of values / note
-
1 ... 65535
-
-
-
1 ... 65535
-
577