Private-Vlan Association - Siemens SCALANCE XC-200 Configuration Manual

Network structures
6.1 VLAN
Further notes
You define a VLAN as a private VLAN and specify the PVLAN type with the command
private-vlan.
You display this setting with the show vlan private-vlan command.
6.1.4.11

private-vlan association

Description
With this command, you assign secondary PVLANs to a primary PVLAN.
Requirement
● The interface is configured as a primary PVLAN.
● You are in the Interface configuration mode.
The command prompt is:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
private-vlan association [{add|remove}] <secondary_Vlan_list>
The parameters have the following meaning:
Parameter
add
remove
secondary_Vla
n_list
Result
The secondary PVLANs are assigned to the primary PVLAN.
Further notes
You delete the link between secondary PVLANs and a primary PVLAN with the command no
private-vlan association.
You display this setting with the show interfaces command.
You configure a an interface as a primary PVLAN with the private-vlan command.
202
Description
Adds a secondary PVLAN..
Removes a secondary PVLAN..
Number of the secondary PVLAN
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Range of values / note
-
-
Separate the PVLANs with commas
if you specify several PVLANs.
Configuration Manual, 07/2017, C79000-G8976-C361-06