Spanning-Tree Passive-Listening-Compatibility - Siemens SCALANCE XC-200 Configuration Manual

The parameters have the following meaning:
Parameter
mst
instance-id
Result
The priority of the device is reset to the default value.
Further notes
You configure the setting with the spanning-tree priority command.
You display this setting and other information with the commands that start with show
spanning-tree ....
6.3.4.12

spanning-tree passive-listening-compatibility

Description
With this command you enable the "Enhanced Passive Listening Compatibility" function.
If you enable the "Enhanced Passive Listening Compatibility" function, the IE switch sends
topology change frames via the (R)STP edge port that caused the topology change.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
spanning-tree passive-listening-compatibility
Result
The "Enhanced Passive Listening Compatibility" function is enabled.
Further notes
You disable the function with the no spanning-tree passive-listening-
compatibility command.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Description
Keyword for a Multiple Spanning Tree
instance
Number of the instance
Network structures
6.3 Spanning Tree
Range of values / note
-
1 ... 64
237