Commands In The Interface Configuration Mode; Rmon Collection Stats - Siemens SCALANCE XC-200 Configuration Manual

Result
The entry is deleted from the RMON event table.
12.4.3

Commands in the interface configuration mode

This section describes commands that you can call up in the interface configuration mode.
Depending on the Interface selected, various command sets are available.
In the Global configuration mode, enter the interface command to change to this mode.
Commands relating to other topics that can be called in the interface configuration mode can
be found in the relevant sections.
● If you exit the Interface configuration mode with the exit command, you return to the Global
configuration mode.
● If you exit the Interface configuration mode with the end command, you return to the
Privileged EXEC mode.
12.4.3.1

rmon collection stats

Description
With this command, you start the recording of statistical data of an interface.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
rmon collection stats <index (1-52)>[owner<ownername(127)>]
The parameters have the following meaning:
Parameter
index
owner
ownername
Result
The recording of statistical data is started.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Description
Number of the recording
User to which the event is assigned
User name of the user
Diagnostics
12.4 RMON
Range of values / note
1 ... 52
-
max. 127 characters
583