Introduction - Siemens SCALANCE XC-200 Configuration Manual

Introduction

Validity of this configuration manual
This Configuration Manual covers the following products:
● SCALANCE XB-200
● SCALANCE XC-200
● SCALANCE XF-200BA
● SCALANCE XP-200
● SCALANCE XR-300WG
Below, the products are also called IE switch, device or network component.
There are two variants of some devices with different article numbers. The two variants differ
only in their factory settings. All other properties are identical.
This Configuration Manual applies to the following software versions:
● SCALANCE XB-200 firmware as of version 3.0
● SCALANCE XC-200 firmware as of version 3.0
● SCALANCE XF-200BA firmware as of version 3.1
● SCALANCE XP-200 firmware as of version 3.0
● SCALANCE XR-300WG firmware as of version 3.0
Factory settings
PROFINET variants
● Industrial Ethernet protocol: PROFINET
● Base Bridge mode: 802.1D transparent bridge
● Redundancy mechanism: Ring redundancy
● Trust mode: Trust COS
EtherNet/IP variants
● Industrial Ethernet protocol: EtherNet/IP
● Base Bridge mode: 802.1Q VLAN Bridge
● Redundancy mechanism: RSTP
● Trust mode: Trust COS-DSCP
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
1
21