The Command - Siemens SCALANCE XC-200 Configuration Manual

Result
The syntax of the command is displayed.
Syntax
If you call up help without parameters, you will obtain a list of all permitted commands in the
current mode:
help
Result
The mode-specific as well as the global commands are displayed.
Note
Incomplete command names
If you have specified an incomplete command when calling help, a list of all commands that
start with the term you have entered is created.
2.9.4.2

The command "?"

Description
With this command, you call up the command list.
Syntax
Enter a question mark to obtain a list of all permitted commands in the current mode:
?
For this command, you do not need to press the enter key. The command executes
immediately after you type the character.
Result
The mode-specific as well as the global commands are displayed.
Note
Incomplete command names
If you have specified an incomplete command when calling the help function, a list of all
commands that start with the term you have entered is created.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
General information
2.9 General CLI commands
41