No Monitor - Siemens SCALANCE XC-200 Configuration Manual

Diagnostics
12.5 Port Mirroring
As default the function is "disabled".
Result
The port mirroring function is enabled.
Further notes
You can display the status of this function with the show monitorcommand.
You disable the function with the no monitor command.
12.5.2.2

no monitor

Description
With this command, you disable the port mirroring function.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no monitor
Result
The port mirroring function is disabled.
Further notes
You can display the status of this function with the show monitorcommand.
You enable the function with the monitor command.
590
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06