System Event Log Table - Siemens SCALANCE X-300 Configuration Manual

System Command Line Interface
Table 4- 10
info
defaults
rm [E|D]
faultmsk
4.2.9

System Event Log Table

Logging events
An IE switch allows you to log events and to display them on the page of the "Log Table"
menu. This, for example, allows you to record when an SNMP authentication attempt failed
or when the connection status of a port has changed. You can specify which events are
logged in the "Agent Event Configuration" menu item. The content of the log table is retained
even when the IE switch is turned off.
Figure 4-13
The "Restart" column indicates the device restart after which the corresponding event
occurred.
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
Configuration using Web Based Management and Command Line Interface
System Configuration - CLI\SYSTEM\SELSET>
Command
Displays the functionality of the button.
Enables/disables the "Restore Factory De-
faults" function of the button.
Enables/disables the "Enable/Disable Redun-
dancy Manager" function of the button.
Enables/disables the "Set Fault Mask" function
of the button.
System Event Log Table
Description
4.2 The System menu
Comment
-
Administrator only.
Administrator only.
Administrator only.
55