Error Message And Chain Link Code Summary - Xerox Phaser 6180 Service Manual

Error Messages and Codes

Error Message and Chain Link Code Summary

3-6
The Error Message Summary table lists possible errors, along with the
corresponding code, and page reference for the corrective procedure.
■
The Control Panel Message column shows the message as it appears on
the printer's display when the error codes during normal operation.
■
The Chain Link column lists codes listed on the printer Error History
Report and the Control Panel.
■ The Go to Page column references the procedure related to the error.
Use this table to identify the proper procedure to correct the reported error.
Error Message and Chain Link Code Display
Chain Link
Control Panel Message
Code
Jam Errors
071-100 Jam at Tray 2 (Feeder 1 Jam)
072-100 Jam at Tray 3
075-100 Jam at Tray 1 (MPT)
077-900 Jam at Exit/Jam at Reg. Roll
077-901
077-903 Jam at Tray 2
077-907 Jam at Duplexer
Consumable/Routine Maintenance Errors
010-317 Insert Fuser
010-351 Replace Fuser
010-359 Fuser CRUM Error
010-397 Fuser Error
010-421 Ready Fuser Life
093-423 Print Cartridge Near Life (Y/M/C/K)
093-424
093-425
093-426
093-919 Check Print Cartridge (Y/M/C/K)
093-920
093-921
093-922
093-925 Print Cartridge CRUM Error (K)
093-926 Non-Xerox Toner Invalid (K) - (Print Cartridge
CRUM ID Error)
Phaser 6180 Color Laser Printer Service Manual
Go to Page
page 3-10
page 3-13
page 3-18
page 3-24
page 3-22
page 3-29
page 3-32
page 3-34
page 3-35
page 3-36
page 3-38
page 3-39
page 3-40
page 3-44
page 3-46