Show Lldp Local-Information - Dell PowerConnect J-EX4200-24T Software Manual

show lldp local-information

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
show lldp local-information
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Displays the information that the switch provides in Link Layer Discovery Protocol (LLDP)
advertisements to its neighbors.
view
Configuring LLDP (CLI Procedure) on page 2344
Understanding 802.1X and LLDP and LLDP-MED on J-EX Series Switches on page 2261
show lldp local-information on page 2494
Table 312 on page 2493 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Table 312: show lldp local-information Output Fields
Field Name Field Description
LLDP Local Information about the local system (the switch):
Information details
Chassis ID
System name
System descr
model and the current software image running on the switch. This information
is taken from the software and is not configurable.
System Capabilities Capabilities (such as
system.
Details of the management information:
Management
Information 10.204.34.35
index),
Interface Name Name of the local interface.
Parent Interface Name of the aggregated Ethernet interface, if any, to which the local interface
belongs.
SNMP interface index.
Interface ID
User-configured port description.
Interface description
Administrative status of the interface: either
Status
Status of tunneling on the interface: either
Tunneling
Chapter 86: Operational Commands for 802.1X
show lldp local-information
—MAC address associated with the switch.
—User-configured name of the switch.
—System description containing information about the switch
bridge or router
), (such as
Address Type
, and
Subtype Interface Subtype
command.
) that are supported or enabled on the
,
Port Name Port Address
or ), (SNMP interface
ipv4 ipv6 Port ID
.
or .
up down
or .
enabled disabled
(such as
2493