Link Layer Discovery Protocol (Lldp) Commands - D-Link xStack Reference Manual

Dgs-3600 series layer 3 managed gigabit ethernet switch

Hide thumbs Also See for xStack:

Table of Contents

DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual

LINK LAYER DISCOVERY PROTOCOL (LLDP) COMMANDS

The Link Layer Discovery Protocol (LLDP) commands in the Command Line Interface (CLI) are listed (along with the

appropriate parameters) in the following table.

The Link Layer Discovery Protocol (LLDP) specified in this standard allows stations attached to an 802 LAN to advertise

to other stations attached to the same 802 LAN the connectivity and management information necessary to identify to

those management entities the station's point of attachment to the 802 LAN. The information distributed via this protocol

is stored by its recipients in a standard management information base (MIB), making it possible for the information to be

accessed by a network management system (NMS) using a management protocol such as the Simple Network

Management Protocol (SNMP)

Show Quick Links

Table of Contents