D-Link xStack Reference Manual page 297

xStack
config gratuitous_arp periodical_send
Description
Parameters
Restrictions
Example usage:
To configure gratuitous ARP interval to 5 for IPIF System:
DGS-3627:admin# config gratuitous_arp send periodically ipif System interval 5
Command: config gratuitous_arp send periodically ipif System interval 5
Success.
DGS-3627:admin#
enable gratuitous_arp trap
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable system interface's gratuitous ARP log and trap:
DGS-3627:admin# enable gratuitous_arp ipif System trap log
Command: enable gratuitous_arp ipif System trap log
Success.
DGS-3627:admin#
disable gratuitous_arp trap
Purpose
Syntax
Description
Parameters
Restrictions
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
The command is used to configure the interval for periodical sending of gratuitous ARP
request packet. By default, the interval is 0.
ipif <ipif_name 12> - Interface name of L3 interface.
interval <value 0-65535> - Periodically send gratuitous ARP interval time in seconds.0 means
not send gratuitous ARP periodically.
Only Administrator and Operator-level users can issue this command.
Used to enable gratuitous ARP trap and log state.
enable gratuitous_arp {ipif <ipif_name 12>} {trap | log}
The command is used to enable gratuitous ARP trap and log state. The switch can trap and
log the IP conflict event to inform the administrator. By default, trap is disabled and event log
is enabled.
ipif <ipif_name 12> - Interface name of L3 interface
trap – Specify to enable traps for gratuitous ARP.
log – Specify to enable the log for gratuitous ARP.
Only Administrator and Operator-level users can issue this command.
Used to disable interface's gratuitous ARP log and trap.
disable gratuitous_arp {ipif <ipif_name 12>} {trap | log}
The command is used to disable gratuitous ARP trap and log state.
ipif <ipif_name 12> - Interface name of L3 interface
trap – Specify to disable traps for gratuitous ARP.
log – Specify to disable the log for gratuitous ARP.
Only Administrator and Operator-level users can issue this command.
293