D-Link xStack Reference Manual page 589

xStack
DGS-3627:admin# download firmware_fromRCP username rcp_user
/home/DGS-3627.had
Command: download firmware_fromRCP username rcp_user
3627.had
Connecting to server................... Done.
Download firmware...................... Done.
Please wait, programming flash......... Done.
Saving current settings to NV-RAM...... Done.
DGS-3627:admin#
To download firmware form RCP using string:
DGS-3627:admin# download firmware_fromRCP rcp: rcp_user@10.1.1.1/home/rcp_user/DGS-
3627.had
Command: download firmware_fromRCP rcp: rcp_user@10.1.1.1/home/rcp_user/DGS-3627.had
Connecting to server................... Done.
Download firmware...................... Done.
Please wait, programming flash......... Done.
Saving current settings to NV-RAM...... Done.
DGS-3627:admin#
To download firmware from RCP Server using rcp string without user name specified, and global RCP Server was not
configured:
DGS-3627:admin# download firmware_fromRCP rcp: 10.1.1.1.DGS-3627.had
Command: download firmware_fromRCP rcp: 10.1.1.1 DGS-3627.had
Using RCP Server Username
Connecting to server................... Done.
Download firmware...................... Done.
Please wait, programming flash......... Done.
Saving current settings to NV-RAM...... Done.
DGS-3627:admin#
To download firmware from RCP using string on file system supported device:
DGS-3627:admin# download firmware_fromRCP rcp: rcp_user@172.18.212.106 /home/DGS-3627.had
dest_file RUN26B18.had boot_up
Command: download firmware_fromRCP rcp: rcp_user@172.18.212.106 /home/DGS-3627.had
dest_file RUN26B18.had boot_up
Connecting to server................... Done.
Download firmware...................... Done.
Please wait, programming flash......... Done.
Saving current settings to NV-RAM...... Done.
Please wait, the switch is rebooting...
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
: rcp_user
172.18.212.106 src_file
172.18.212.106 src_file /home/DGS-
Do not power off!
Do not power off!
Do not power off!
Do not power off!
585