D-Link xStack Reference Manual page 450

xStack
create mac_based_access_control_local
Parameters
Restrictions
Example usage:
To create one MAC-based Access Control local database entry for MAC address 00-00-00-00-00-01 and specify that the
host will be assigned to the "default" VLAN after the host has been authorized:
DGS-3627:admin# create mac_based_access_control_local mac 00-00-00-00-00-01 vlan default
Command: create mac_based_access_control_local mac 00-00-00-00-00-01 vlan default
Success.
DGS-3627:admin#
config mac_based_access_control_local
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the target VLAN "default" for the MAC-based Access Control local database entry 00-00-00-00-00-01:
DGS-3627:admin# config mac_based_access_control_local mac 00-00-00-00-00-01 vlan default
Command: config mac_based_access_control_local mac 00-00-00-00-00-01 vlan default
Success.
DGS-3627:admin#
delete mac_based_access_control_local
Purpose
Syntax
Description
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
mac - Specify the MAC address that can pass local authentication.
vlan - Specify the target VLAN by using the VLAN name. When this host is authorized, it will
be assigned to this VLAN.
vlanid - Specify the target VLAN by using the VID. When this host is authorized, it will be
assigned to this VLAN if the target VLAN exists.
Only Administrator and Operator-level users can issue this command.
Used to configure a MAC-based Access Control local database entry.
config mac_based_access_control_local mac <macaddr> [vlan <vlan_name 32> |
vlanid < vlanid 1-4094> | clear_vlan]
This command is used to configure a MAC-based Access Control local database entry.
mac - Specify the authenticated host's MAC address.
vlan - Specify the target VLAN by VLAN name. When this host is authorized, the host will be
assigned to this VLAN.
vlanid - Specify the target VLAN by VID. When this host is authorized, the host will be
assigned to this VLAN if the target VLAN exists.
clear_vlan - Clear target VLAN information for specific hosts from the local database.
Only Administrator and Operator-level users can issue this command.
Used to delete a MAC-based Access Control local database entry.
delete mac_based_access_control_local [mac <macaddr> | vlan <vlan_name 32> |
vlanid < vlanid 1-4094>]
This command is used to delete a MAC-based Access Control local database entry.
446