D-Link xStack Reference Manual page 592

xStack
DGS-3627:admin# upload firmware_toRCP rcp: rcp_user@10.1.1.1/home/rcp_user/DGS-3627-
uploaded.had
Command: upload firmware_toRCP rcp: rcp_user@10.1.1.1/home/rcp_user/ DGS-3627-
uploaded.had
Connecting to server................... Done.
Upload firmware........................ Done.
DGS-3627:admin#
To upload firmware on a switch that supports a file system:
DGS-3627:admin# upload firmware_toRCP rcp: rcp_user@172.18.212.106 DGS-3627-R26B18.had
src_file RUN26B18.had
Command: upload firmware_toRCP rcp: rcp_user@172.18.212.106 DGS-3627-R26B18.had src_file
RUN26B18.had
Connecting to server................... Done.
Upload firmware........................ Done.
DGS-3627:4#
download cfg_fromRCP
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To download a configuration file from an RCP server:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Download configuration file from the RCP server.
download cfg_fromRCP [{ username <username 15>} {<ipaddr>} src_file
<path_filename 64> |rcp:<string 128>] {dest_file <pathname 64>}
This command is used to download a configuration file from an RCP server.
username - The remote user name on the RCP Server.
ipaddr - The IP address of the RCP server.
path_filename - The pathname specifies the pathname on the RCP server or local RCP
client.
Note: If a user specifies the relative file path, the path search strategy will depend on the
server system. For some systems, the current user working directory will be searched first,
followed by the environment paths.
rcp: <string 128> - Syntax: rcp: username@ipaddr/directory/filename
Example for FULL path: user_name@10.1.1.1/home/user_name/desxxxx.had
Example for relative path: user_name@10.1.1.1./desxxxx.had
Note: No SPACE in the whole <string>.
Only Administrator level users can issue this command.
588