D-Link xStack Reference Manual page 54

xStack
show acct_client
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display information of RADIUS accounting client:
DGS-3627:admin# show acct_client
Command: show acct_client
radiusAcctClient ==>
radiusAcctClientInvalidServerAddresses
radiusAuthServerEntry ==>
radiusAccServerIndex : 1
radiusAccClientServerPortNumber
radiusAccClientRetransmissions
radiusAccClientMalformedResponses
radiusAccClientBadAuthenticators
radiusAccClientPendingRequests
radiusAccClientPacketsDropped
DGS-3627:admin#
config accounting service
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Enable it to configure accounting shell state:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display information of RADIUS accounting client.
show acct_client
The show acct_client command displays information of RADIUS accounting client.
None.
None.
Used to configure the state of the specified RADIUS accounting service.
config accounting service [ network | shell | system ] state [ enable | disable ]
The config accounting service command is used to enable or disable the specified RADIUS
accounting service.
network - Accounting service for 802.1X port access control. By default, the service is
disabled.
shell - Accounting service for shell events:
When user logs on or out the switch (via the console, Telnet, or SSH) and timeout occurs,
accounting information will be collected and sent to RADIUS server. By default, the service is
disabled.
system - Accounting service for system events: reset, reboot. By default, the service is
disabled.
enable - Enable the specified accounting service.
disable - Disable the specified accounting service.
Only Administrator and Operator-level users can issue this command.
0
2
0
0
0
0
0
50