D-Link xStack Reference Manual page 637

xStack
delete snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a SNMP user "user123":
DGS-3627:admin# delete snmp user user123
Command: delete snmp user user123
Success.
DGS-3627:admin#
show snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show SNMP user:
DGS-3627:admin# show snmp user
Command: show snmp user
Username
--------------------------------
initial
user123
Total Entries : 2
DGS-3627:admin#
create snmp group
Purpose
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
This command is used to remove a user from an SNMP group and delete the associated
group in SNMP group.
delete snmp user <username 32>
The delete snmp user command removes a user from a SNMP group and deletes the
associated group in SNMP group.
Note: This is SNMPv3 command, if it is used; All SNMPv1/v2 commands are not necessary.
<username32> - The name of the user on the host that connects to the agent. The range is 1
to 32.
Only Administrator and Operator-level users can issue this command.
This command is used to display information on each SNMP username in the group
username table.
show snmp user
The show snmp user command displays information on each SNMP username in the group
username table.
Note: This is SNMPv3 command, if it is used; All SNMPv1/v2 commands are not necessary.
None.
None.
--------------------------------
This command is used to create a new SNMP group, or a table that maps SNMP users to
Group Name
initial
group123
633
VerAuthPriv
-----------
V3 NoneNone
V3 MD5 DES