D-Link xStack Reference Manual page 162

xStack
config bpdu_protection
Restrictions
Example usage:
To config the bpdu_protection trap state as both for the entire switch:
DGS-3627:admin# config bpdu_protection trap both
Commands: config bpdu_protection trap both
Success.
DGS-3627:admin#
enable bpdu_protection
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable bpdu_protection function globally for the entire switch:
DGS-3627:admin# enable bpdu_protection
Commands: enable bpdu_protection
Success.
DGS-3627:admin#
disable bpdu_protection
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable bpdu_protection function globally for the entire switch:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
attack_cleared - Events will be logged or trapped when the BPDU attacks is cleared.
both - The events of attack_detected and attack_cleared shall be trapped or logged.
Only Administrator and Operator-level users can issue this command.
Used to enable bpdu_protection globally.
enable bpdu_protection
The enable bpdu_protection command is used to enable bpdu_protection function globally for
the entire switch.
None.
Only Administrator and Operator-level users can issue this command.
Used to disalbe bpdu_protection globally.
disable bpdu_protection
The disable bpdu_protection command is used to disable bpdu_protection function globally
for the entire switch.
None.
Only Administrator and Operator-level users can issue this command.
158