D-Link xStack Reference Manual page 529

xStack
debug ospf show redistribution
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current OSPF redistribution list:
DGS-3627:admin# debug ospf show redistribution
Command: debug ospf show redistribution
OSPF Redistribution List:
IP
------------------
1.1.1.0/24
OSPF ASE Table:
IP
------------------
1.1.1.0/24
DGS-3627:admin#
debug ospf show summary_list
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current OSPF summary list:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display the current internal OSPF redistribute list. This command can be used if the
external route advertising is not correct.
debug ospf show redistribution
This command is used to display the current internal OSPF redistribute list.
None.
Only Administrator level users can issue this command.
Nexthop State Type Tag
--------------- ----- ---- ---------------
0.0.0.0 ON
Nexthop State Type Tag
--------------- ----- ---- ---------------
0.0.0.0 ON
It is used to display the current internal OSPF summary list. This command can be used if
one or more OSPF neighbors state stay at ExStart or Exchange.
debug ospf show summary_list
This command is used to display the current internal OSPF summary list.
None.
Only Administrator level users can issue this command.
2 0.0.0.0
2 0.0.0.0
525