D-Link xStack Reference Manual page 397

xStack
show jwac
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display global configuration of JWAC:
DGS-3627:admin# show jwac
Command: show jwac
State
Enabled Ports
Virtual IP/URL
Switch HTTP Port
UDP Filtering
Forcible Logout
Redirect State
Redirect Delay Time
Redirect Destination
Quarantine Server
Q-Server Monitor
Q-Server Error Timeout
RADIUS Auth-Protocol
RADIUS Authorization
Local Authorization
DGS-3627:admin#
show jwac update_server
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show update server:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display the configuration of JWAC.
show jwac
The show jwac command allows you to show all the configuration of JWAC.
None.
None.
: Enabled
: 1:1,1:11,1:23,1:25,1:35
: 1.1.1.1/www.kyoto.ac.jp
: 21212 (HTTP)
: Enabled
: Enabled
: Enabled
: 3 Seconds
: Quarantine Server
: http://172.18.212.147/pcinventory
: Enabled (Running)
: 5 Seconds
: PAP
: Enabled
: Enabled
Used to display the configuration of JWAC update server.
show jwac update_server
This command displays the configured update server's network and their accessible ports.
The function will use system's common resource, thus some entries may not active if the
resource is not sufficient when JWAC is enabled.
None.
None.
393