D-Link xStack Reference Manual page 395

xStack
DGS-3627:admin# config jwac user juser_tom vlan 3
Command: create jwac user juser_tom vlan 3
Enter a case-sensitive new password:***
Enter the new password again for confirmation:***
Success.
DGS-3627:admin#
delete jwac user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a local user.
DGS-3627:admin# delete jwac user juser_tom
Command: delete jwac user juser_tom
Success.
DGS-3627:admin#
show jwac user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
This example displays the JWAC users in the local database:
DGS-3627:admin# show jwac user
Command: show jwac user
User Name Password
---------- ----------
juser_tom
Total Entries : 1
DGS-3627:admin#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to delete JWAC user into local DB.
delete jwac [user <username 15> | all_users]
The delete jwac user command deletes JWAC users from the local DB.
user - To specify the user name to be deleted
all_users - All user accounts in local DB will be deleted.
Only Administrator and Operator-level users can issue this command.
Used to show JWAC user into local DB.
show jwac user
The show jwac user command displays JWAC users in the local DB.
None.
None.
VID
------
1 3
391