D-Link xStack Reference Manual page 615

xStack
config ssh algorithm
Parameters
Restrictions
Example usage:
To enable ssh server public key algorithm:
DGS-3627:admin# config ssh algorithm DSS enable RSA enable
Command: config ssh algorithm DSS enable RSA enable
Success.
DGS-3627:admin#
show ssh algorithm
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show server algorithm:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
3DES - Specify ssh server encryption algorithm.
blowfish - Specify ssh server encryption algorithm.
AES(128,192,256) - Specify ssh server encryption algorithm.
arcfour - Specify ssh server encryption algorithm.
cast128 - Specify ssh server encryption algorithm.
twofish(128,192,256) - Specify ssh server encryption algorithm.
MD5 - Specify ssh server data integrality algorithm.
SHA1 - Specify ssh server data integrality algorithm.
DSS - Specify ssh server public key algorithm.
RSA - Specify ssh server public key algorithm.
enable - Specify to enable the algorithm.
disable - Specify to disable the alogirthm.
Only Administrator and Operator-level users can issue this command.
Used to show ssh server algorithm.
show ssh algorithm
The show ssh algorithm command show the ssh service algorithm.
None.
None.
611