D-Link xStack Reference Manual page 226

xStack
debug dhcpv6_client output
Description
Parameters
Restrictions
Example usage:
To set debug information to output to console:
DGS-3627:admin# debug dhcpv6_client output console
Command: debug dhcpv6_client output console
Success.
DGS-3627:admin#
debug dhcpv6_client packet
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable DHCPv6client packet sending debug flags:
DGS-3627:admin# debug dhcpv6_client packet sending state enable
Command: debug dhcpv6_client packet sending state enable
Success.
DGS-3627:admin#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Set message output to buffer or console.
buffer - Let the debug message output to buffer.
console - Let the debug message output to console.
Only Administrator and Operator-level users can issue this command.
Used to enable or disable the debug information flag for DHCPv6 client packets, including
packet receiving and sending.
debug dhcpv6_client packet {all | receiving| sending} state [enable | disable]
Enable or disable the debug information flag for DHCPv6 client packets, including packet
receiving and sending.
all - Set packet receiving and sending debug flags.
receiving - Set packet receiving debug flag.
sending - Set packet sending debug flag.
enable - Enable the designated flags.
disable - Disable the designated flags.
Only Administrator and Operator-level users can issue this command.
222