D-Link xStack Reference Manual page 33

xStack
show bpdu_tunnel
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show BPDU tunneling state of all ports:
DGS-3627:admin# show bpdu_tunnel
Command: show bpdu_tunnel
BPDU Tunnel
STP Tunnel Multicast Address
STP Tunnel Ports
GVRP Tunnel Multicast Adrress
GVRP Tunnel Port
Uplink Ports
DGS-3627:admin#
enable bpdu_tunnel
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the BPDU Tunneling function:
DGS-3627:admin# enable bpdu_tunnel
Command: enable bpdu_tunnel
Success.
DGS-3627:admin#
disable bpdu_tunnel
Purpose
Syntax
Description
Parameters
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to show BPDU Tunneling global state, tunnel destination MAC address and ports state.
show bpdu_tunnel
This command is used to show BPDU Tunneling global state, tunnel destination MAC
address and ports state.
None.
None,
: Enabled
: 01-05-5d-00-00-00
: 1,2
: 01-05-5d-00-00-21
: 5,6
: 3,4
Used to enable the BPDU Tunneling function.
enable bpdu_tunnel
Enable the BPDU Tunneling function.
By default, BPDU Tunneling is disable.
None.
Only Administrator and Operator-level users can issue this command.
Used to disable the BPDU Tunneling function.
disable bpdu_tunnel
Disable the BPDU Tunneling function.
None.
29