D-Link xStack Reference Manual page 478

xStack
DGS-3627:admin# show stp
Command: show stp
STP Bridge Global Settings
-----------------------------
STP Status
STP Version
Max Age
Forward Delay
Max Hops
TX Hold Count
Forwarding BPDU
LoopBack Detection : Enabled
NNI BPDU Address
DGS-3627:admin#
show stp instance
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show stp instance:
DGS-3627:admin# show stp instance
Command: show stp instance
STP Instance Settings
---------------------------
Instance Type
Instance Status
Instance Priority
STP Instance Operational Status
--------------------------------
Designated Root Bridge : 32768/00-22-22-22-22-00
External Root Cost
Regional Root Bridge
Internal Root Cost
Designated Bridge
Root Port
Max Age
Forward Delay
Last Topology Change
Topology Changes Count : 0
DGS-3627:admin#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
: Enabled
: MSTP
: 20
: 15
: 20
: 3
: Enabled
: dot1d
Used to show each instance parameters settings.
show stp instance <value 0-15>
This command displays each instance parameters settings. Value means the instance id, if
there is no input of this value, all instance will be shown.
instance - MSTP instance id . Instance 0 represents for default instance：CIST. The bridge
support total 16 Instance（0-15）at most.
None.
: CIST
: Enabled
: 32768(Bridge Priority : 32768, SYS ID Ext : 0 )
: 0
: 32768/00-22-22-22-22-00
: 0
: 32768/00-22-22-22-22-00
: None
: 20
: 15
: 2430
474