D-Link xStack Reference Manual page 29
Dgs-3600 series layer 3 managed gigabit ethernet switch
Hide thumbs
Also See for xStack:
- Reference manual (1284 pages) ,
- User manual (357 pages) ,
- Hardware installation manual (71 pages)
Table of Contents
Advertisement
xStack
DGS-3627:admin# disable ipif Intface_1
Command: disable ipif Intface_1
Success
DGS-3627:admin#
enable ipif_ipv6_link_local_auto
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Enable the automatic configuration of link local address for an interface:
DGS-3627:admin# enable ipif_ipv6_link_local_auto Intface_1
Command: enable ipif_ipv6_link_local_auto Intface_1
Success
DGS-3627:admin#
disable ipif_ipv6_link_local_auto
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Disable the automatic configuration of link local address for an interface:
DGS-3627:admin# disable ipif_ipv6_link_local_auto Intface_1
Command: disable ipif_ipv6_link_local_auto Intface_1
Success
DGS-3627:admin#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Enable the auto configuration of link local address when no IPv6 address is configured.
enable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
Enable the auto configuration of link local address when there are no IPv6 addresses
explicitly configured. When an IPv6 address is explicitly configured, the link local address will
be automatically configured, and the IPv6 processing will be started. When there is no IPv6
address explicitly configured, by default, link local address is not configured and the IPv6
processing will be disabled. By enable this automatic configuration, the link local address will
be automatically configured and IPv6 processing will be started.
ipif_name - Specifies the name of the IPv6 interface used.
all - Specifies that all the interfaces will be enabled.
Only Administrator and Operator-level users can issue this command.
Disable the auto configuration of link local address when no IPv6 address are configured.
disable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
Disable the auto configuration of link local address when no IPv6 address is explicitly
configured.
ipif_name - Specifies the name of the IPv6 interface used.
all - Specifies that all the interfaces will be disabled.
Only Administrator and Operator-level users can issue this command.
25
- Quick Links:
- Cable Diagnostics Command List
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the xStack and is the answer not in the manual?
Questions and answers