D-Link xStack Reference Manual page 387

xStack
enable jwac forcible_logout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable JWAC forcibly logout function:
DGS-3627:admin# enable jwac forcible_logout
Command: enable jwac forcible_logout
Success.
DGS-3627:admin#
disable jwac forcible_logout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable JWAC forcibly logout function:
DGS-3627:admin# disable jwac forcible_logout
Command: disable jwac forcible_logout
Success.
DGS-3627:admin#
enable jwac udp_filtering
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to enable JWAC forcibly logout function.
enable jwac forcible_logout
When forcibly logout feature is enabled, a PING packet from an authenticated host to the
JWAC Switch with TTL=1 will be regarded as a logout request, and the host will be moved
back to unauthenticated state.
None.
Only Administrator and Operator-level users can issue this command.
Used to disable JWAC forcibly logout function.
disable jwac forcible_logout
When forcibly logout feature is disabled, even a PING packet from an authenticated host to
the JWAC Switch with TTL=1 will be ignored, and the host is still in an authenticated state.
None.
Only Administrator and Operator-level users can issue this command.
Used to enable or disable JWAC UDP filtering function.
enable jwac udp_filtering
When UDP filtering feature is enabled, all UDP and ICMP packets except for DHCP and DNS
packets from unauthenticated hosts will be dropped.
None.
Only Administrator and Operator-level users can issue this command.
383