D-Link xStack Reference Manual page 100

xStack
debug error_log
Parameters
Restrictions
Example usage:
To dump the error log:
DGS-3627:admin# debug error_log dump
Command: debug error_log dump
**************************************************************************
# debug log: 1
# level: fatal
# clock: 10000ms
# time : 2010/03/11 13:00:00
====================== SOFTWARE FATAL ERROR =======================
Invalid mutex handle : 806D6480
Current TASK : bcmARL.0
------------------------- TASK STACKTRACE ------------------------
->802ACE98
->8018C814
->8028FF44
->8028352C
->801D703C
->8013B8A4
->802AE754
->802A5E0C
->802A5D6C
--------------------------------------------------------------------------
TASK NAME StackTop
8069E7D0 FWD-ETH
806A3E70 SysLogTask
E:SysLogEvent
Output truncated...
debug buffer
Purpose
Syntax
Description
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
The "error_log" here refers to the software error log stored in NVRAM. For more information
on this command, please refer to the UIS-Debug topic
dump - Displays debug messages occurring in the debug log.
clear - Clears the debug log.
upload_toTFTP - Uploads the debug log to the TFTP server that is specified by its IP
address.
<ipaddr> - IP version 4 address
<path_filename 64> - Uploads the debug log to the TFTP server and names it to the string
<path_filename 64>.
Only Administrator level users can issue this command.
CurStkSP StackSize
823E9798 823E95C4
80BD040C 80BD0298
This command is used to show the debug buffer's state, dump clear, or upload the debug
buffer to the TFTP server
debug buffer [utilization | dump | clear | upload_toTFTP <ipaddr> <path_filename 64>]
This command is used to show the debug buffer's state or dump, clear, or upload the debug
SchCnt PRIO(I)
1K/ 32K 2
1K/ 16K 3
96
STATUS
160/160 Q:IP_PKT
180/180