D-Link xStack Reference Manual page 346

xStack
DGS-3627:admin# delete ip standard access_list list_name List1
Command: delete ip standard access_list list_name List1
Success.
DGS-3627:admin#
show ip standard access_list
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Show the information of an access list named "List1":
DGS-3627:admin# config ip standard access_list List1 add 10.10.10.0/24 permit
Command:4# config ip standard access_list List1 add 10.10.10.0/24 permit
Success.
DGS-3627:admin# show ip standard access_list List1
Command:4# show ip standard access_list List1
IP standard Access_list:
Total entries number
filter : permit 10.10.10.0/24
Total Access_list number :
DGS-3627:admin#
clear ip prefix_list counter
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear prefix list counters for the prefix list named "first_list" that matches the 192.168.10.0/24 prefix:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
This command is used to show the information of access list.
show ip standard access_list {<list_name 16>}
This command is used to show the information of an access list.
<list_name> - The name of the access list.
None.
List1
: 1
1
To clear prefix list hit counters.
clear ip prefix_list counter [list_name <list_name 16> {<network_address>} | all]
This command is used to clear prefix list hit counters. The hit count is a value indicating the
number of matches to a specific prefix list entry.
<list_name 16> - Name of the prefix list from which the hit count is to be cleared.
<network_address> - Specifies that IPv4 network which the hit count is to be cleared.
Only Administrator and Operator-level users can issue this command.
342