D-Link xStack Reference Manual page 751

xStack
DGS-3627:admin# show wac
Command: show wac
Web-based Access Control
-----------------------------
State
Method
Redirect Path
Virtual IP
Virtual IPv6
Switch HTTP Port
RADIUS Authorization
Local Authorization
DGS-3627:admin#
show wac ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show WAC port state and other parameters:
DGS-3627:admin# show wac ports 1-3
Command: show wac ports 1-3
Port State
------- ------------- -------------
1:1 Enabled
1:2 Enabled
1:3 Enabled
Success.
DGS-3627:admin#
show wac user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show WAC local user:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
: Enabled
: RADIUS
: http://tw.yaholl.com
: 0.0.0.0
: 2000::20
: 80 (HTTP)
: Enabled
: Enabled
Used to display web authentication port level setting.
show wac ports { <portlist> }
This command allows the user to display the port level setting.
ports - A range of member ports to show the status.
None.
Aging Time
(min)
------------ ------------
60
60
120
Used to user account for web authentication.
show wac user
The show wac user command allows you to show web authentication account.
None.
None.
Idle Time Block Time
(min) (sec)
30
30
60
747
120
120
120