D-Link xStack Reference Manual page 223

xStack
show dhcp pool
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the DHCP pool information:
DGS-3627:admin# show dhcp pool Floor2
Command: show dhcp pool Floor2
Pool Name
Network Address
Domain Name
DNS Server Address
NetBIOS Name Server
NetBIOS Node Type
Default Router
Pool Lease
Boot File
Next Server
Total Pool Entry: 1
DGS-3627:admin#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to show the DHCP pool information.
show dhcp pool {<pool_name 12>}
This command is used to display the DHCP pool information. Entering the command without
the pool name will display all DHCP pool information on the switch.
<pool_name 12> – Enter the name of the DHCP pool for which to view DHCP pool
information.
None.
:Floor2
:10.0.0.0/8
:
:0.0.0.0
:0.0.0.0
:Broadcast
:0.0.0.0
:1 Days, 0 Hours, 0 Minutes
:
:0.0.0.0
219