D-Link xStack Reference Manual page 506

xStack
Usage example
To disable OSPF on the Switch:
DGS-3627:admin# disable ospf
Command: disable ospf
Success.
DGS-3627:admin#
show ospf
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show OSPF state:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display the current OSPF state on the Switch.
show ospf {[ipif <ipif_name 12> | all]}
This command will display the current state of OSPF on the Switch, divided into the following
categories:
General OSPF settings
OSPF Interface settings
OSPF Area settings
OSPF Virtual Interface settings
OSPF Area Aggregation settings
OSPF Host Route settings
ipif – Specify the IP interface here.
None.
502