D-Link xStack Reference Manual page 330

xStack
DGS-3627:admin# show mld_snooping
Command: show mld_snooping
MLD Snooping Global State
Multicast router Only
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Listener Query Interval
Node Timeout
Router Timeout
Done Timer
Querier State
Querier Router Behavior
State
Fast Done
Version
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Listener Query Interval
Node Timeout
Router Timeout
Done Timer
Querier State
Querier Router Behavior
State
Fast Done
Version
DGS-3627:admin#
show mld_snooping group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show an MLD snooping group:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
: default
: 125
: 10
: 2
: 1
: 260
: 260
: 2
: Disabled
: Non-Querier
: Enabled
: Disabled
: 2
: 6
: 125
: 10
: 2
: 1
: 260
: 260
: 2
: Disabled
: Non-Querier
: Enabled
: Disabled
: 2
Used to display the current MLD snooping group information on the switch.
show mld_snooping group {vlan <vlan_name 32>}
This command displays the current MLD snooping group information on the switch.
vlan - Specify the name of the VLAN for which you want to view MLD snooping group
information.
If VLAN and ports and IP address are not specified, the system will display all current IGMP
snooping group information.
None.
: Disabled
: Disabled
326