D-Link xStack Reference Manual page 642

xStack
delete snmp view
Restrictions
Example usage:
To delete SNMP view "view123":
DGS-3627:admin# delete snmp view view123 all
Command: delete snmp view view123 all
Success.
DGS-3627:admin#
show snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show SNMP view:
DGS-3627:admin# show snmp view
Command: show snmp view
Vacm View Table Settings
View Name
--------------------------------
view123
restricted
restricted
restricted
restricted
restricted
CommunityView
CommunityView
CommunityView
Total Entries: 9
DGS-3627:admin#
create snmp host
Purpose
Syntax
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
all - All view record.
oid - Object-Identified tree, MIB tree.
Only Administrator and Operator-level users can issue this command.
This command is used to display the SNMP view record.
show snmp view {<view_name 32>}
The show snmp view command displays the SNMP view record.
view_name - View name of the user who likes to show.
None.
----------------------------------
This command is used to create a recipient of an SNMP trap operation.
create snmp [ host <ipaddr> | v6host <ipv6addr>] [v1 | v2c | v3 [noauth_nopriv |
auth_nopriv | auth_priv] ] <auth_string 32>
Subtree
1.3.6
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1.3.6.1.6.3.10.2.1
1.3.6.1.6.3.11.2.1
1.3.6.1.6.3.15.1.1
1
1.3.6.1.6.3
1.3.6.1.6.3.1
638
View Type
----------
Included
Included
Included
Included
Included
Included
Included
Excluded
Included